- Joined
- 1 May 2018
- Messages
- 61
- Reaction score
- 3
- Country
Is there a preferred approach to routing twin and earth for ring circuits in a bungalow with suspended floors?
If I come from the top I would have to do a fair bit of chasing down to some sockets. I have pulled down the old ceilings so currently no insulation or cramped spaces to tackle in the loft.
If I connect from under floor I only have to chase a little. The floor void is about 750mm deep with some honeycomb dwarf walls. Some boards are coming up for new CH pipes.
The kitchen isn't suspended floor so I have to come down the walls here in any case.
It's free labour, as I will be doing the cable bashing, but I am not sure what the ideal approach would be in the context of a quality electrical installation.
What would generally be the preferred method given the scenario described?
Also no chasing required for light switches as I am using kinetically energised wireless switches
Cheers
If I come from the top I would have to do a fair bit of chasing down to some sockets. I have pulled down the old ceilings so currently no insulation or cramped spaces to tackle in the loft.
If I connect from under floor I only have to chase a little. The floor void is about 750mm deep with some honeycomb dwarf walls. Some boards are coming up for new CH pipes.
The kitchen isn't suspended floor so I have to come down the walls here in any case.
It's free labour, as I will be doing the cable bashing, but I am not sure what the ideal approach would be in the context of a quality electrical installation.
What would generally be the preferred method given the scenario described?
Also no chasing required for light switches as I am using kinetically energised wireless switches
Cheers