Good dusk-to-dawn sensor for use with LED?

Joined
25 May 2011
Messages
207
Reaction score
51
Location
London
Country
United Kingdom
For security reasons I have a couple of LED dusk-to-dawn lamps, one external and one which is internal but next to an upstairs window on which I almost never need to use a blind or curtain. They work fine. However I also want one on my ground floor that works ok when the blinds there are down, such as when I'm away. I've tried the existing lamps internally but the ambient light level seems to be too low for their range even in full daylight as they illuminate all the time with the blinds down. So for the moment I use a timer and have to adjust it throughout the year as dusk and dawn times change. I've ordered a cheap supposedly-adjustable sensor off Amazon as an experiment but don't have high hopes as it's meant to be mounted externally; I could possibly do that but it would make the internal wiring run unsightly, so I'd prefer a sensor for internal use that can switch on when the ambient light level falls to extremely low and off when it rises to merely low. Afraid I can't give specific light levels for that but please think of a normal house with curtains or blinds. Any recommendations please?
 
I use a Tapo (TP-Link) light switch which uses a battery and does not need a neutral, and it works out dusk and dawn from the internet, it needs no sensors to decide when to turn on lights, in fact mine is set to turn on 1 hour before dusk.
 
Not sure that would do what the OP wants.

I'd prefer a sensor for internal use that can switch on when the ambient light level falls to extremely low and off when it rises to merely low.

Light levels in a room at dusk/dawn can vary quite a lot due to weather - clear and sunny vs heavily overcast and raining.
 
This is why my switch set one hour before dusk, as to dawn, I would hope already turned off by then, but I set it off at dawn just in case.

My problem is the outside light, to ensure the milkman does not trip set to switch on at 6 am and off at dawn, but once dawn arrives before 6 am it does not switch off.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top