Hello.
I have a combi boiler in a Y plan system. I have an airing cupboard with the pump and valve upstairs and the boiler, controller and thermostat downstairs. I believe all of the electrics go into the junction box upstairs which then feeds the valve, pump, boiler and controller downstairs.
However, there is no electric to any of those components. I have checked the mains feed coming into the junction box and it's dead.
So I thought this would be a fuse that has blown. I have read that these systems are usually fed from a 3Amp spur. However, I cannot find the fuse anywhere. The RCD hasn't tripped, there is no isolated feed from the RCD to the heating system - only the Water heater which works fine. Every socket in the house still works.
So I am at a loss. Should I expect to see a fuse box somewhere for the heating system? Is it likely to be near the airing cupboard or the boiler/controller?
I have looked everywhere but cannot find it.
Thanks!
I have a combi boiler in a Y plan system. I have an airing cupboard with the pump and valve upstairs and the boiler, controller and thermostat downstairs. I believe all of the electrics go into the junction box upstairs which then feeds the valve, pump, boiler and controller downstairs.
However, there is no electric to any of those components. I have checked the mains feed coming into the junction box and it's dead.
So I thought this would be a fuse that has blown. I have read that these systems are usually fed from a 3Amp spur. However, I cannot find the fuse anywhere. The RCD hasn't tripped, there is no isolated feed from the RCD to the heating system - only the Water heater which works fine. Every socket in the house still works.
So I am at a loss. Should I expect to see a fuse box somewhere for the heating system? Is it likely to be near the airing cupboard or the boiler/controller?
I have looked everywhere but cannot find it.
Thanks!