How can it stay at 10 mb for a minute then rise to 24 after a short time? That doesn't make sense.
By my experiance i would say this has to be a leak in your rubber hose!!How can it stay at 10 mb for a minute then rise to 24 after a short time? That doesn't make sense.
Sun suddenly came out beating down on that 30 metres 28mm tube fixed to end of terrace wall?
i raised pressure to 10mbar for 1 min and less than .2 movement ocourd, then my phone rang and after 5mins or so i looked bk at manometer and it was up to 24mbar. i would say thats a fail but found no more info in corgi book???
i raised pressure to 10mbar for 1 min and less than .2 movement ocourd, then my phone rang and after 5mins or so i looked bk at manometer and it was up to 24mbar. i would say thats a fail but found no more info in corgi book???
did you repeat it the test? watching.
ffs catch the line of the thread !! also any rgi in cc would catch this oneNot very experienced then are you
ffs catch the line of the thread !! also any rgi in cc would catch this oneNot very experienced then are you
First rule of Registered Gas Installer - Turn the F*****G phone off while doing gas checksi raised pressure to 10mbar for 1 min and less than .2 movement ocourd, then my phone rang
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local