Samsung smart TV (UE32J5500), switch to analogue

[Diyisfun]

Just got Sky install, all works ok.
Now want second TV to show the picture that is on Sky.
My Sky box does not have RF sockets, so I have purchased an I/O box, connected it up as per instructions, doesn't find the analogue signal, it is going via a powered aerial distribution system.
So I have now bypassed the distribution system & put a direct cable from the I/O box to the 2nd TV. Returned the 2nd TV & it shows one analogue channel, so the I/O is working.
I cant see how to change my TV to view the analogue channel.

Googled & user instructions still no joy, any ideas please.

 

[big-all]

samsung tv press channel one goes to channel one press one again selects analouge

 

[Diyisfun]

I'm on live chat to Samsung, they say no Analogue, then they say press '1'.
====
I press '1', it goes to channel1, press it again, nothing
===
found this
In my experience with Samsung tv's you can normally access the analogue channels (in your case the one that is tuned into sky) by scrolling down through the freeview channels and before the first channel (ie BBC 1, freeview) the analogue one's are stored. If there is no tv/dtv button on the remote the above way is the only way to access them, as far as I know anyway. I hope this helps!

 

[Diyisfun]

big-all, get a job @ Samsung.
Sorted, I was doing as you said, but maybe to quick, it works.
So tomorrow try & get it working via the distribution system, the TV's on that have DTV/TV switch.
Thanks

 

[big-all]

just be aware it could be on any channel so you may have to try several as in say channel 9 or 0 it doesnt have to be one just because it could only find one frequency