Joined
24 May 2016
Messages
3,641
Reaction score
674
Country
United Kingdom
UPDATE: I have given up for the moment trying to find out why the previous pumps failed... BUT THE HUNTING IS BACK. After use, it hunts over the next hour or so every 5-10 minutes, then hunts maybe 4 times over the next 24 hours. As I cant access them, I assume its a problem, possibly air, in the pipes between the pump and the shower. I have seen on another forum, advice to fit Non Return Valves on these pipes - doe sthis make sense? If so, what are the bes ones to get for 15mm pipes please? Any ideas?
Another forum? Off with his head!!! :D
Have heard of fitting NRV`s before but then some manufactures make a point of saying don`t fit them.
 
Sponsored Links
Joined
18 Mar 2017
Messages
989
Reaction score
183
Location
Wales
Country
United Kingdom
After use, it hunts over the next hour or so every 5-10 minutes, then hunts maybe 4 times over the next 24 hours.
Why do you have the pump switched on when you are not using the shower?
 
Joined
5 Feb 2021
Messages
20
Reaction score
0
Country
United Kingdom
OK thanks Just Pumps - I#ll give that a miss then.... (and I was it on anorther post I meant, not another forum! ;) )
 
Joined
5 Feb 2021
Messages
20
Reaction score
0
Country
United Kingdom
Alec: Standard operating procedure for a shower pump. And as a matter of principle, I dont like turning things on and off....
 
Sponsored Links
Joined
24 May 2016
Messages
3,641
Reaction score
674
Country
United Kingdom
Another forum? Off with his head!!! :D
Have heard of fitting NRV`s before but then some manufactures make a point of saying don`t fit them.
You could always ask @SalamanderPumps their view on fitting nrv on this pump, I would be interested to see their reply tbh for futher knowledge.
 
Joined
5 Feb 2021
Messages
20
Reaction score
0
Country
United Kingdom
Hi Just pumps, Salamander do not recommend NRV to stop the hunting. It may reduce the hunting, but SOP to do isolation test etc. So, to me, it looks like the best thing to do (rather than replumb from pump to shower head) is to turn the pump off after use, and turn on for use. Not great, but looks best for now. Thanks for your help, D
 
Joined
24 May 2016
Messages
3,641
Reaction score
674
Country
United Kingdom
Thought that might be the case with Salamander pumps. No worse than having to pull the cord on old electric showers to turn on I guess .
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Top