- Joined
- 3 Mar 2017
- Messages
- 16
- Reaction score
- 1
- Country
Just picked up a Lightwave smart switch (3 way), I’m trying to replace an existing 4 way switch with a 3 way smart switch with dimming. I plan to have one of the switches control 2 sets of existing lights hence 3.
I have attached a few pictures to explain below.
The smart switch has a single entry point for live rather than having to use a common and linking wires. If my understanding is correct, I would need to put all brown live wires together and put them in the new live slot? I doubt it would fit. Then, I would need to work out which blue switched live is which light as you can see in the picture these are grouped. Am I going about this right?
Appreciate the help, thanks.
I have attached a few pictures to explain below.
The smart switch has a single entry point for live rather than having to use a common and linking wires. If my understanding is correct, I would need to put all brown live wires together and put them in the new live slot? I doubt it would fit. Then, I would need to work out which blue switched live is which light as you can see in the picture these are grouped. Am I going about this right?
Appreciate the help, thanks.