I am trying to install a Salus RT300 RF thermostat I currently have a honeywell stat which has 3 wires red blue and yellow. I have connected the red a blue wire to the salus stat and it show a red light. I have tried to connect the yellow to either of the connectors on the receiver but it does not turn the heating on.
When the temperature is turned up you can hear the receiver click so that part is working but the heating does not come on.
Anyone got any ideas?
Thank you
When the temperature is turned up you can hear the receiver click so that part is working but the heating does not come on.
Anyone got any ideas?
Thank you