baxi

Hi, my boiler - Baxi Platinum 28E, currently has a wireless thermostat / receiver installed. The current thermostat receiver has a Live / Neutral and 2 x black on/off wires attached. Can I just connect these wires to the Live / Neutral and on/off terminals in the Hive receiver? If so it'll be...

desperately needing help, I had a new baxi boiler 800 combi fitted last week and its constantly making a whining humming noise, it no sooner stops and it starts again. The plumber came back and drained the radiators but its still the same. my friend and neighbour both have the same boiler and...

Hi, I moved into my house a few months back but with the weather fine had no need to use the heating and now its getting colder I tried putting it on but it doesnt seem to work. No error codes displayed. Pressures fine. I topped the gas up (payg) I turned the boiler off and back on again and it...

Have searched the site for solution and couldn't find one for my problem, hopefully someone is able to advise on where I have went wrong. Formerly had potterton EP2002 controller connected to my BAXI system boiler 60/100. (See photo) This also had a thermostat wired in and has a hot water...

Hello All, I am currently having an issue with my Baxi Duo Tec 40 HE A not maintaining a constant temperature for the domestic hot water. With a thermometer under a tap & the domestic hot water thermostat set to 43 °C I get a fluctuating temperature from 51 °C to 38 °C which is clearly not...

Hello, I have a Baxi combi boiler and I'm having problems with the hot water. When the heating is on I have no problem and can get hot water but at other times it is very hit and miss. As well when I am running the tap at a low flow I can get hot water. I have been told that this is probably...

Hi was having a look at the wiring for my boiler (baxi duo tec a 24) to see if a nest thermostat would be suitable. My currant thermostat has a mind of it own. The wiring doesn't look right to me, just popping it all in a terminal strip together. Normally my dad would have a look (he was a...

Hi we've not long moved into our new house which has a back boiler heating system and a baxi Bermuda 50/3 inset. The hot water has never been an issue(infact it's probably too hot) but we now have no heating, obviously at the moment it's difficult to get anyone to come out with lockdown on but...

I know this is probably a dump question but just want to check. I'm thinking of getting a nest 3rd gen thermostat fitted to my Baxi duo tec 23 HE A (about 6 years old). Will it work on openthrem or just on/off ? Thanks

Hi, I am finding a small pool of water in the mornings, and I have traced it back the the 3 way diverter assembly, it is dripping from where the diaphragm housing couples the the 3 way valve assembly, is this simply a O ring, also do I need to drain the system to remove only the diaphragm...

Hi and thanks for reading. Moved into a new flat recently and I’m being driven crazy by a problem. Here are the central Heating appliances I have: Baxi Megaflo 2 compact GA ThermaQ Unicyl 180 Indirect unvented storage Cylinder 2 Altech wall controls- one for the H/W (timer only) the other for...

Hi all, I have an existing Baxi EcoBlue Advance combi boiler controlled by a Nest 3rd gen via Heat Link. I’ve just installed an Omnie UFH system (wet, boiler fired) and am trying to connect up its wiring centre, with it being controlled by the same Nest (as opposed to Omnie’s own thermostat)...

I have had a lot of issues with Explosive ignition on my boiler ... relayed here ... https://www.diynot.com/diy/threads/baxi-barcelona-explosive-ignition.470102/page-6#post-3784907 After another load of parts - flue, fan, gas valve, more boards, new burner(again), burner door (again) ... and...

Hi all, I'm new to this so I will get to the point and try to be clear as possible. I'm currently trying to install a Nest Thermostat E with Heat Link to a Baxi Combo Duotec 28. There is currently a Horstmann Hrt4-zw attached with the wiring below for the wireless receiver. Now how do I...

Hello all. Been babysitting an old Baxi105e for three years and it's not a disaster but a bit temperamental. Current niggle : first time in the day, the CH side only fires up if the Hot water is run at the tap first for a few minutes. On turning the hot tap off the CH smoothly takes over and...

Dear all, Just moved to new home.... I have a Baxi combi boiler; fairly new and a "Center" 7 day programmable Room stat. This is located in the dining room https://www.wolseley.co.uk/product/center-7-day-programmable-room-thermostat-230-v/ also On each of the radiators we have a "Myson TRV 2...

Hi ive got a question having the flue set up this way is safe with this boiler or should it be just horizontal, going up its around 51cm ive been told today by RGI that this is wrong but have been running it for 2 years

Hello so ive got a problem i replaced a fan because it wasnt running at all now the problem is when i put on the front cover the boiler wont turn on but when i loosen it a bit it ignites no problem any ideas what could be the problem?.

Just need to confirm that this will work before I buy... I have one cable coming out of my Baxi Platinum Combi 28 HE boiler into a Salus RT500RF receiver. I want to install Hive so is it just a case of L to L, N to N, Earth to Earth and COM to No1 on the Hive? I would imagine that I would need...

Hi all. Spent some time in this forum trying to find the solution for this problem and got many tips, but the boiler is not working properly. When I first noticed the water sandwich the pressure was below 1. Managed to fill it up, and the meter was increasing really quick but slowly going...