no actually i'm not unlike you who has to resort to these sort of stupid answers.you are just as bad you halfwit.
thankfully i haven't sunk as low to join the CC.
no actually i'm not unlike you who has to resort to these sort of stupid answers.you are just as bad you halfwit.
there is aperfectly good reason for recommending the 1 company i wouldn't normally support in any fashion and it quite simple
1. they know the faults of the boilers. not all RGI's do.
2. their engineers are likely to have the required spares on their van. Again as independent engineers we carry regular spares but not specific spares for an Ideal unless we see them regularly
3. Ideal offer a fixed price repair. something that at present we cannot do as the spares are expensive in relation to the price Ideal pay.
if there is more than 1 fault which sadly there often is with Ideal boilers then the customer could be waiting sometime as a wait for a spare can be several days fix the first problem only to find a 2nd and again a few days wait. hardly good for anyone.
so on this i would say get Ideal to see to it.
I pity the poor soul who has to go to a 7 year old icos that has never been touched.
Its going to be a treat. im half expecting the burner box to be burnt through when we get the outcome
thanks Garfield
i always put the customer first as i have in this instant. love a company or loath them if they can do the job in a more cost effective/less time consuming way then i will say use them. customers really on honesty and will stay loyal if you take care not to fleece them.
unfortunately some on here can only resort to insulting people as they aren't capable of seeing the wood for the trees!!
no actually i'm not unlike you who has to resort to these sort of stupid answers.you are just as bad you halfwit.
thankfully i haven't sunk as low to join the CC.
more likely you aren't registered so can't!! it is nice to have a section where we can discuss things in an adult manner without silly little name calling episodes like we have here!
perhaps i should finally drag my fat BG a**e into the CC to upset your cosy little apple cart.
Gentlemen, this is a public forum where members of the public can view disagreements between RGI's. If you are qualified Nickso, then perhaps you should join the CC and air your grievances there.
If you are not qualified, then, as in one of your latests posts, you informed the OP that it was safe for him to change a Suprima PCB which involves combustion chamber work and retort to 'slagging' off other RGI's who disagreed, may I respectfully suggest you learn to be gracious to suitably qualified engineers.
perhaps i should finally drag my fat BG a**e into the CC to upset your cosy little apple cart.
Daggers at dawn.
Gentlemen, this is a public forum where members of the public can view disagreements between RGI's. If you are qualified Nickso, then perhaps you should join the CC and air your grievances there.
If you are not qualified, then, as in one of your latests posts, you informed the OP that it was safe for him to change a Suprima PCB which involves combustion chamber work and retort to 'slagging' off other RGI's who disagreed, may I respectfully suggest you learn to be gracious to suitably qualified engineers.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local