fault

Hi team, I’m a fire alarm engineer and have tried to branch into a bit of security stuff in my own house. So far it’s not going brilliantly. I’ve installed a wireless pyronix enforcer kit. Delta bell/4 pirs/1 door contact/1 wireless keypad and a couple of remote fobs. Install went well. But...

Hi all!! I have a smartcom, premier elite 24, and my broadband has been down for 4 days now, intermittently coming back up with a fix ETA of another few days. Is there any way to disable fault chirp via RKP to avoid it bleeping at ridiculous o clock in the morning? I have a RKP in my bedroom ...

Hi I have an american fridge freezer model RS53K4400SA s/n 051x4ebha00993m bought from curry a couple of years ago. It has developed a fault No lights no display no chill freeze or water. If switched off for a short period I can hear something power up when switched back on all fuses are fine...

Hello To all, Recently I bought a house . The alarm type is Eurosec ( I believe it is CP8L) The previous owner mentioned that they never used this alarm and they forgot the code. The display shows "Mains Flt" I don't know what this means, Is there anyway to make this alarm working. Please help me.

Hi all, I'll start by saying that I'm not a plumber/electrician so I don't know which category this falls under as I don't even know what the problem is. Anyway... I've got a Mira Advance ATL Thermostatic Shower. It's roughly 3-4 years old. My memory fails me. However, last week it started...

So I am at my grandparents in Maidstone installing a Wireless Pyronix alarm in their bungalow. To run power to the panel, I take a 1mm² T&E from a junction box in the loft (what is on one of the lighting circuits) to the FCU and then to the Pyronix panel. First check for power at the panel and...

Hi folks, Not been on here for a few years. see some familiar names though. Can anyone help me troubleshoot a 3.5 KVa capacitor regulated brushless alternator? It produces almost no voltage on the outputs (about 4 Vac open circuit at stator winding) So far I have: 1: checked the excitation...

Have a Ideal Logic 30 (Combi Boiler) with "PCB Fault" on screen (photo below). No hot water for anything. Manual gives no indication. Photo of serial number below. Anyone ideas? I gather the "1304" means it was manufactured in 2013 on the 4th week of the year.

Hi, Have bought a house and inherited a Vaillant EcoMax 835/2 boiler, about 10 years old. Seemed to be working at first. However it started to give f25 faults and now alternates between f25 and f32. You can clear the fault and then it might work, but sometimes it takes 3/4 attempts. When set...

Hi, I'm getting a F05 fault and been trying to diagnose..... Rang feroli and they've talked me through checking a few settings in the service menu, to which has not proven to work, this then leaves a replacement PCB....? Seen re-conditioned ones one ebay for £60, although a bit apprehensive...

Hi, I'm having a problem with one of my keyprox modules (address 1), when I went out earlier on I used it to full set via pin number, when I came home again it wouldn't respond to a fob to unset or accept a pin, subsequently the alarm triggered and had to be unset from a second keypad (address...

I'm hoping someone can help us. Our upvc window frame is lifting up off th windowsill. Does anyone know why this might be happening? We've just sold our house and are trying to get everything in order before we move. I've attached a photo of the problem. Any help is much appreciated. Thank you...

the boiler fully works but every few hours the hot water light will start flashing and the boiler sounds like it's working, but there is no hot water running I have to reset the boiler to stop it doing this Does anyone know what this is? Thanks

hi, firstly a bit of back ground. a couple of weeks ago the hot water pipe under our both blew off (due to the chap who fitted the bathroom before we bought the house not tightening a compression fitting properly) anyway this led to the hot water pumping out under the bath for around 20 mins...

hey guys, Could i get some advice on a issue i think iv diagnosed but need confirmation. I have a ideal evo he which keeps getting the El faults code on the screen. It does not happen all the time and might not happen for weeks than again it might happen twice in a day. Once reset it works...

Hi there, If anyone can help me or at least give me some pointers it would be great, as I am seriously stuck. I do have a technical back ground but my knowledge of central heating is very limited, prior to making a choice on attempting a repair or looking at going down the combi route as a...

Hi All, Our Potterton Promax has developed an annoying fault where it doesn't always light - usually first thing in the morning, so when we all want the shower and a warm house it doesn't happen. It has been known to happen in the evenings as well. When it doesn't light, it goes through the...

Hi all we have an ariston microgenius 23/27 mffi Lovely chap came yesterday to do annual gas safety check (which it passed with flying colours) However now we have no heating or hot water If you switch hot water tap on, the boiler makes all the right noises and then the red ignition failure...

So replaced the two old ugly X10 appliance light switches in my bedroom and installed a new Fibaro FGS-222 Z-Wave enabled relay module inside a 47mm dry-line back box along with a standard double switch for local control. Pain in the *** to get it all in the back box and get the switch screwed...

Hi About 3 months ago the door lock on our washer was clicking constantly. I ordered a new branded door lock and fitted it fine. The plastic connector from the wiring harness to the lock showed some evidence of burning but it fitted OK, still, to the new lock and functioned fine. This...