oven

  1. L

    Oven - Beko OIF22300, no light or heat...

    Hi - so it seems like my oven has died. While the clock and timer functions work perfectly well, turning the control knobs neither turns on the light or fan inside the oven, nor does any heating begin. Can I ask what this might suggest as a point of failure, perhaps something not as simple as a...
  2. M

    Reconnecting fan oven element - which way around?

    Hi there I'm changing the element on a caple C2234 fan oven and stupidly forgot to take a photo of the element wires before disconnecting. If I was to incorrectly reconnect the new element with live and neutral the wrong way around, what would happen? Thanks a lot for your help!
  3. Necrosis

    Replacement oven on 32amp ring

    So apologies in advance as I'm no electrician. I had an extension built 7 years ago with new wiring. The more I look, the more I see where my builder cut corners. I want to replace my single Samsung oven (BT621VDSD). I have pulled it out to see how it is wired but a double socket was placed...
  4. Minisaurus

    Bosch freestanding oven left on overnight, nothing working now

    Hello forum, My daughter sneaked up in the night, used the oven, left it on, circa 70 degrees. Now nothing really works - the hob plates do get slightly warm, and the indicator lights aren’t working properly. Any ideas where to start? I could upload an appliance circuit diagram later, if that...
  5. eveares

    Kitchen appliance service man advise us to upgrade 20A MCB to 32A! (Rant)

    We had our Electrolux combi microwave/fan oven replaced with a brand new one under warranty as our old one was written of due to severe rust, what prevented a previous repair man being unable to get to and replace the heater element what was leaking current to earth and tripping the RCD. I was...
  6. L

    Oven cooling fan not turning off

    Hi, I have an Electrolux electric oven, model EOB53001X. I have recently replaced the grill element but since this the cooling fan will not stop running. Will only stop when oven is switched off at the wall. I suspect that the oven themostat needs to be replaced. Has anyone else had this...
  7. M

    Cooker circuit in kitchen refit by cowboy kitchen fitter and electrician

    Hi, I would like to give thanks to every member of this forum, I have been watching and read upon many posts for the past few years and have learned a lot. I apologize in advance but I would very much like some advice on electrical work which has been completely messed up by a cowboy kitchen...
  8. A

    Hidden Kitchen Junction Box

    We're in the process of renovating our kitchen. We've removed the existing tiles, and in the splashback area above the hob we found a small mdf patch hiding a junction box. I'll let the pictures do the talking but wanted advice on whats best to do. It doesn't power the hob, oven or extractor...
  9. C

    Problems Fixing a New Built Under Oven

    I've just installed a brand new built under double oven (Belling BI702FP) in my apartment. The oven works and is sitting on the brackets, however it's not secured to the housing or worktop. My previous oven had a metal plate attached to the top of the oven that screwed into the underside of the...
  10. M

    New cooker installation.

    Hi, we are getting a new cooker. The old one has been removed from a circuit that states 32amp circuit in the consumer unit for the cooker. All the new cookers I am looking at seem to want higher? 40amp plus. Have I misunderstood is it OK to use the current circuit and just replace old cooker...
  11. C

    Strange Oven Issue - Works but only one way.

    Hi guys I've got a single electric oven that we've had for about a year now. It's a cheap Culina one but we have to buy cheap as the depth of our space is 530mm and you can't get *good* brands at that depth. Anyway something strange is happening recently. My wife mentioned the oven wouldn't...
  12. C

    Oven Powered But No Modes Trigger Response

    Hi all, Here's where I'm at. Oven worked fine yesterday, the clock is still working (so it's powered), but now when changing to any mode (fan, heat, light, grill) and setting a temperature, the fan doesn't start, and nothing heats up. I've tried changing to automatic mode using the timer, and...
  13. H

    Oven & Hob radial circuit

    Hi all, I would like to get some advice please on the following circuit for our new kitchen. The proposed layout has a 3.2kw electric oven and a 7.4kw induction hob. These would connect via 45A isolation switches to a 6mm2 radial circuit. I am running the cables myself and would like to know...
  14. K

    13 amp spur for oven

    Hello, I am replacing an old double electric oven with a slightly smaller single oven. The old one was hard wired using 40amp cable to a switch box in an adjoining cupboard. The new oven appears to come with a 13 amp cable (without plug). I am assuming this new oven will need to be fused at...
  15. I

    New oven...

    We got a new oven and gas hob, they use significantly less power then the old ones. (Old ones probably around 20 years old) Set up for old oven hob is 32A dedicated circuit with oven, gas hob ignition and a single socket. The oven didn't come with cables (Beko BQE222X). It's total power...
  16. A

    Oven Element Replacement wrong spade connector

    Hello all, my oven recently packed up and I went online to see what the issue could be. So I ordered a new replacement element after typing in my oven product Number. When the new element arrived it had a different connection my old one has 2 single spades and the new one has 2 double shades. I...
  17. G

    should I use foil tape above oven ?

    Ive fitted a kitchen, just about to install hob and oven, do I need to use foil tape above the oven ? Also does it need to be a certain type ? eg fire resistant ? I found some in my garage from years ago will that do ? I had to remove the front support on the oven unit , should I add a bit...
  18. mpaxton78

    Enamel repair oven mounting edge

    Does anyone know of a good product for repairing the enamel where an integrated oven mounts to the unit? I bought an ex-display unit and someone has managed to damage it in the process of removal Enamel is a gloss grey and I don't need much but not sure which products are suitable and not too...
  19. mixer28

    Housing for Oven splintered - Can I use ePoxy?

    I need to replace my oven and have pulled it out to look at the 'frame' that holds it. The screws that held the oven in had come loose and on inspection I can see the chipboard has splintered around where the holes are (see below). Whats the best thing to fills the holes. The chipboard...
  20. A

    Ovens on plugs ?

    Hello , Il after a new oven , am I right in thinking an oven under 3kw is fine on a plug top ?? Thanks
Back
Top